



1、采用触摸屏操作系统,软件更稳定,页面更直观
2、采用两种送扣模式:大小扣模式和大扣快速模式、跟据需要自由转换,常规送扣:从输扣槽直接送到扣夹座。进入送扣参数:打开“大扣快速”,纽扣预送至送扣机与钉扣机,中间待机(待机位置可设置),比常规送扣速度快
3、机臂纽扣扣柄长短调节:根据纽扣柄长短,通过调节螺丝根据实际要求快速调节,调节方便快捷
4、扣夹压扣:采用气缸压扣模式,纽扣不跑偏,夹扣更稳固
5、输扣槽:独特设计简洁高效的输扣槽采用底部、上部吹气,不卡扣送扣更顺畅。定时返吹装置:使纽扣不会堵在输扣槽进口处
6、伺服电机:采用大功率伺服电机送扣,送扣速度快、震动小音低,送扣效率更高
7、纽扣适用范围8mm-28mm,四孔位,两孔位
8、此送扣装置可通配1903系列,438系列,373系列,4-2系列等各种机型
适用性能强
该设备可搭配重机、兄弟款等各种品牌、型号的钉扣机,还可以搭配服装厂现有在使用的钉扣机上,大大节省了重新购买新钉扣机的费用
1.It adopts a touchscreen operating system, featuring more stable software and a more intuitive interface
2.It adopts two button feeding modes: Small & Large Button Mode and Large Button Fast Mode, which can be freely switched according to needs.
3.Length Adjustment of Button Shank on Robot Arm: According to the length of the button shank, quick adjustment can be made via adjusting screws as per actual requirements, featuring convenient and fast operation.
4.Button Clip Pressing: Adopting the cylinder pressing mode, it prevents button deviation and ensures more stable clamping
5.Feed Chute: Uniquely designed for simplicity and high efficiency, the feed chute blows air from both the bottom and the top to prevent jamming and ensure smooth button feeding.Timed reverse-blow device: keeps buttons from blocking the inlet of the feed chute.
6.Servo Motor: A high-power servo motor drives the button feeding, delivering faster speed, lower vibration and quieter operation for significantly higher feeding efficiency.
7.Button size range: 8 mm – 28 mm, suitable for both 2-hole and 4-hole buttons.
8.This button-feeding unit is universally compatible with 1903, 438, 373, 4-2 and other series machines.
Wide applicability
The unit can be paired with Juki, Brother and other brands and models of button-sewing machines, as well as with the machines already in use in garment factories, eliminating the need to purchase new equipment and saving considerable expense.
| 型号Model | PFT-T600 | PFT-T600-1903 | PFT-T600-438 | PFT-T600-373 | PFT-T600-1377 |
| 配置Setup | 单配置Setup | 1903D | 438D | 373D | 1377D |
| 机针Needle(DP*17) | TQ*1-14 | TQ*1-14 | TQ*1-14 | TQ*1-14 | |
| 额定钉扣速度(PCS/min) | 40-50 | 40-50 | 40-50 | 40-50 | 40-50 |
| 连续钉扣速度(PCS/min) | 60-65 | 60-65 | 60-65 | 60-65 | 60-65 |
| 最高转速Maximum Speed S.P.M | 2600pm | 2600pm | 1500pm | 1500pm | |
| 压脚高度Presser Foot Height mm | 12 | 13 | 13 | ||
| 纽扣直径Button Diameter mm | 6-28 | 6-28 | 6-28 | 6-28 | 6-28 |
| 纽扣厚度Button Thickness mm | 1-5 | 1-5 | 1-5 | 1-5 | 1-5 |
| 气压Air Pressure MPR | 0.25-0.30 | 0.25-0.30 | 0.25-0.30 | 0.25-0.30 | 0.25-0.30 |
| 电压Voltage | VAC110/220V±10%: 50/60Hz | VAC110/220V±10%: 50/60Hz | VAC110/220V±10%: 50/60Hz | VAC110/220V±10%: 50/60Hz | VAC110/220V±10%: 50/60Hz |
| 额定功率Rated Power W | 65 | 600+65 | 600+65 | 600+65 | 600+65 |
| 包装尺寸Package Dimensions(mm) | 580x550x460 | 1250x750x1220 | 1250x750x1220 | 1250x750x1220 | 1250x750x1220 |
| 重量Weight | 35kg | 135kg | 135kg | 115kg | 115kg |
Address: Room 502, Unit 2, Building 9, Hongdi Intelligent Science and Technology Innovation city, Xiachen Street, Jiaojiang District, Taizhou City, Zhejiang Province
Copyright © 2025 Taizhou Perfect Technology Co., Ltd.

